August 30, 2011
Admat Introduces New 300mm Tantalum Coilsets
Admat Inc, a leading supplier of tantalum and niobium mill products, announced today the introduction of high purity 300mm tantalum coilsets to their semiconductor product line. These coilsets will be used in select physical vapor deposition (PVD) chambers and are available in a wide range of purities, the most common being 99.99% and 99.995% pure tantalum.
Admat will offer these parts to sputtering target fabricators who can perform final surface treatments and pair them with the required sputtering targets for end users.
The company’s Sales Director, Eric von Spreckelsen stated, “I am very pleased to finally introduce this product to our thin films portfolio. These coilsets have undergone a lengthy development process with extensive testing, both internally and in the field. Our customers will be very pleased with both the performance and value of this product”.
With each coilset, Admat will provide GDMS chemistry certifications and full CMM reports are available upon request. Select coilsets will be included in their inventory stocking program.
March 28, 2011
New Stocking Program Reduces Tantalum and Niobium Strip and Foil Lead Times
US based tantalum and niobium supplier, Admat Inc. announced today the implementation of a new inventory program designed to reduce lead times and improve delivery performance for select sizes of tantalum and niobium strip and foil. This new program will put significant quantities of inventory in place so that customers can react quicker to market demands while reducing their inventory costs.
The program covers various gauges of tantalum and niobium strip such as .004”, .005” .008” and .010”. Most items are 6” wide and are engineered specifically for deep drawing applications. Admat’s customers can now release shipments for overnight deliveries, whereas typical industry lead times for such items average 12-14 weeks.
“Admat is very excited about this new stocking program,” the company stated.
“As our competitors continue to cut services and inventory, Admat is committed to improving our performance and will invest in ourselves accordingly,” said Eric von Spreckelsen, Admat’s Director of Sales.
Admat is a leading supplier of tantalum and niobium metals and alloys. Forms include plate, sheet, strip, foil, ingot, rod, wire, tube, targets, capacitor grade powder and fabricated parts. Sales and distribution are based out of their headquarters located near Valley Forge National Park
October 15, 2010
Admat Relocates to New Larger Office Near Valley Forge National Park
Admat Inc is pleased to announce the relocation of their corporate office and distribution center. The new headquarters merges both the Wayne, PA office and the Reading, PA sales office into one more functional location. Furthermore, because of the significant increase in warehousing space, our customers will benefit from reduced lead times. This new location is in Pinebrook Business Center, just a short drive from Philadelphia and neighbors Rockwell Automation.
October 1, 2010
Admat Inc. Introduces Tungsten 10% Titanium To Their Thin Films Product Line
Admat Inc. announced today the addition of Tungsten 10% Titanium sputtering targets to their growing thin films product line. These new targets are available in the standard purity of 4N and higher purities of 4N5 and 5N upon special request. Production capabilities allow for various shapes and sizes of up to 300mm diameter or 230mm square. Hongju Chang, Ph.D., Admat’s C.E.O., stated “This is an exciting new product which further compliments our existing line of solar and semiconductor products”. The company’s Sales Director, Eric von Spreckelsen further added, “The introduction of Tungsten 10% Titanium to our portfolio takes Admat one step closer to our goal of performing as a single source refractory supplier to the semiconductor marketplace”. These targets are shipped with full factory certifications, including GDMS chemistry results. Additional information is available at the company’s website, www.admatinc.com.
January 10. 2010
Admat Announces New Tantalum 7.5% Tungsten Wire Products
Admat Inc, has announced an expanded Tantalum portfolio today with the addition of Tantalum 7.5% Tungsten wire. This particular alloy is designed for used in chlorination systems for water purification. Our customers will fabricate the wire into various size springs which will open and close valves feeding chlorine gas. This particular alloy is well suited to handle the corrossive nature of chlorine. But only Admat’s powder metallurgy production process ensures the ideal mechanical properties to prevent failure, even after millions of cycles.
